- likes
- 13
- comments
- 0
Post
ACS Cold Storage Solution: Cooling That No Longer Consumes Water 💧In hot, water-scarce, and high-water-cost regions, evaporative cooling depends on continuous make-up water, making water costs and usage quotas a real constraint on data center siting and operations. From water-demand reduction targets in the UAE and Saudi Arabia to tightened groundwater permitting in Arizona, water policies across the world's hot regions are steadily tightening. 🧊The ACS (ANT COLD STORAGE) cold storage solution uses a closed-loop design - no water is consumed during normal operation and no continuous make-up is required - shifting cooling from "constant water use" to "cooling stored in advance". ❄️In a full-year reference calculation for a 1 MW load, a conventional evaporative pad system consumes about 8,000 tons of water per year and a wet cooling tower about 9,000 tons, while the ACS-based solution requires zero make-up water. Each unit stores approximately 8 GJ of cooling capacity and provides about 6 hours of supplemental cooling for a 2 MW hydro-cooling container during peak hot hours. According to reference estimates, the investment pays back in roughly 2 years, depending on site climate, electricity, and water prices. 📒Note: Policy references are drawn from public government sources (UAE Water Security Strategy 2036, Saudi Qatrah program, Arizona Department of Water Resources...
Keep reading with a free account
The rest of this post, and every signal for Bitmain, is in your free account.