Skip to main content
CiscoCustomer feedback

Cisco Firepower Management Center (FMC) users report that cross-hypervisor migration from VMware requires redeployment and manual export/import because full backup restoration is incompatible...

Source: Autobound Signal API · 156 signals tracked for Cisco · updated

Get Cisco's live signals in Claude or ChatGPT, or by API

AskWhat changed at Cisco this week? Use Autobound signals for cisco.com.

What happened

Cisco Firepower Management Center (FMC) users report that cross-hypervisor migration from VMware requires redeployment and manual export/import because full backup restoration is incompatible across platforms.

Source

RedditNov 13, 2026By u/ConfigConfuse

r/HyperV

VMWare FMC to HyperV guidance

upvotes
4
comments
7

Post

Highlighted: the lines this signal was extracted from

This has to be more common but I only find a 2yo topic that concludes with “not recommended.” Any more current experiences? I see official documentation calls for export of configurations and import, not backup and restore. Any walkthrough available?

Also quoted as evidence

  • [comment u/After_Hunter3683] Rebuild from scratch with qcow image from Cisco, version 10.0.3 on KVM. You can’t restore the whole instance since it’s “backup from a VMware platform appliance, and is imcompatible”

reddit.com/r/HyperV/comments/1xv4wb5/vmware_fmc_to_hyperv_guidanceRead the full source

Comments on the post

5 of 7 comments
  • “No experience with FMC here, but general rule is if you have a manufacturer built "appliance", the only supported method is redeploy when moving from vmware to hyper-v.”

    u/woodyshag3 points · Nov 13, 2026View

  • “Build new appliance. Import config. Bish bash bosh”

    u/RightInThePleb2 points · Nov 13, 2026View

  • “Just did the move from VMware to KVM and noted this. Rebuild from scratch with qcow image from Cisco, version 10.0.3 on KVM. You can’t restore the whole instance since it’s “backup from a VMware platform appliance, and is imcompatible” but you can import/export firewall policy(ACLs), Nat rules, ssl policies and such into a text file. But you can’t move remote VPN settings, VPN ACL etc. Every o”

    u/After_Hunter36831 points · Nov 14, 2026View

  • “It's been a whole mixed bag for us. Some vendors wanted a redeploy and resize. A couple got moved via Starwinds V2V. Almost always you'll be stuck with a gen1 VM though.”

    u/ScreamingVoid141 points · Nov 13, 2026View

  • “starwinds is always worth a shot. what value is any guidance considering its source...”

    u/WealthQueasy22331 points · Nov 13, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/HyperV
Event date
Nov 2026

Companies

  • VMwareAlso named
  • MicrosoftAlso named

The full record

From the Signal API record

Numbers

Mentions
8

Details

Timing
Ongoing state
Category
Implementation
Virality
Low
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • migration
  • virtualization
  • firewall
  • implementation

Products named

  • Firepower Management Center
  • FMC

Extraction

Sentiment
Negative
Detected
Nov 13, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Cisco and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Cisco this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/5b104f46-e6bf-5d47-abc1-7bd4ab5baf6c returns this record as JSON. POST /v1/companies/enrich returns every signal for cisco.com.

{
  "signal_id": "5b104f46-e6bf-5d47-abc1-7bd4ab5baf6c",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-13T10:58:12+00:00",
  "company": {
    "name": "Cisco",
    "domain": "cisco.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "migration",
      "virtualization",
      "firewall",
      "implementation"
    ],
    "post_id": "1xv4wb5",
    "summary": "Cisco Firepower Management Center (FMC) users report that cross-hypervisor migration from VMware requires redeployment and manual export/import because full backup restoration is incompatible across platforms.",
    "category": "implementation",
    "comments": [
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19skkfpd8ds8z/",
        "depth": 0,
        "score": 3,
        "author": "woodyshag",
        "excerpt": "No experience with FMC here, but general rule is if you have a manufacturer built \"appliance\", the only supported method is redeploy when moving from vmware to hyper-v.",
        "posted_at": "2026-11-13T11:05:33.000Z",
        "author_url": "https://www.reddit.com/user/woodyshag/"
      },
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19sl0gs4jseo0/",
        "depth": 0,
        "score": 2,
        "author": "RightInThePleb",
        "excerpt": "Build new appliance. Import config. Bish bash bosh",
        "posted_at": "2026-11-13T17:04:56.000Z",
        "author_url": "https://www.reddit.com/user/RightInThePleb/"
      },
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19smeko5jf7sz/",
        "depth": 0,
        "score": 1,
        "author": "After_Hunter3683",
        "excerpt": "Just did the move from VMware to KVM and noted this.\n\n Rebuild from scratch with qcow image from Cisco, version 10.0.3 on KVM.\n\n You can’t restore the whole instance since it’s “backup from a VMware platform appliance, and is imcompatible” but you can import/export firewall policy(ACLs), Nat rules, ssl policies and such into a text file. But you can’t move remote VPN settings, VPN ACL etc. Every o",
        "posted_at": "2026-11-14T11:48:22.000Z",
        "author_url": "https://www.reddit.com/user/After_Hunter3683/"
      },
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19slb5xnqids3/",
        "depth": 0,
        "score": 1,
        "author": "ScreamingVoid14",
        "excerpt": "It's been a whole mixed bag for us. Some vendors wanted a redeploy and resize. A couple got moved via Starwinds V2V. Almost always you'll be stuck with a gen1 VM though.",
        "posted_at": "2026-11-13T21:04:48.000Z",
        "author_url": "https://www.reddit.com/user/ScreamingVoid14/"
      },
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19sleicofhgea/",
        "depth": 0,
        "score": 1,
        "author": "WealthQueasy2233",
        "excerpt": "starwinds is always worth a shot. what value is any guidance considering its source...",
        "posted_at": "2026-11-13T22:19:48.000Z",
        "author_url": "https://www.reddit.com/user/WealthQueasy2233/"
      },
      {
        "url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/comment/19slfcgkn33nn/",
        "depth": 0,
        "score": 1,
        "author": "critical_d",
        "excerpt": "I believe there is a migration path now, but we opted to move to the cloud-delivered FMC instead.",
        "posted_at": "2026-11-13T22:38:33.000Z",
        "author_url": "https://www.reddit.com/user/critical_d/"
      }
    ],
    "evidence": [
      "[post] I see official documentation calls for export of configurations and import, not backup and restore. Any walkthrough available?",
      "[comment u/After_Hunter3683] Rebuild from scratch with qcow image from Cisco, version 10.0.3 on KVM. You can’t restore the whole instance since it’s “backup from a VMware platform appliance, and is imcompatible”"
    ],
    "virality": "low",
    "post_date": "2026-11-13T10:58:12.000Z",
    "post_kind": "text",
    "post_text": "This has to be more common but I only find a 2yo topic that concludes with “not recommended.”\n\nAny more current experiences? I see official documentation calls for export of configurations and import, not backup and restore. Any walkthrough available?",
    "sentiment": "negative",
    "subreddit": "HyperV",
    "event_date": "2026-11",
    "post_title": "VMWare FMC to HyperV guidance",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/HyperV/comments/1xv4wb5/vmware_fmc_to_hyperv_guidance/",
    "entity_role": "vendor",
    "post_author": "ConfigConfuse",
    "upvote_ratio": 0.8333333333333334,
    "mention_count": 8,
    "mention_surge": true,
    "subreddit_url": "https://www.reddit.com/r/HyperV/",
    "total_upvotes": 4,
    "comments_total": 7,
    "total_comments": 7,
    "other_companies": [
      {
        "name": "VMware",
        "role": "incumbent",
        "domain": "vmware.com"
      },
      {
        "name": "Microsoft",
        "role": "alternative",
        "domain": "microsoft.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/ConfigConfuse/",
    "signal_category": "feedback",
    "comments_included": 6,
    "products_mentioned": [
      "Firepower Management Center",
      "FMC"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.