Skip to main content
CorningCustomer feedback

Technicians discuss using Corning CCH panels as an alternative for multi-customer fiber enclosures, though one commenter notes their stub trays are subpar.

Source: Autobound Signal API · 83 signals tracked for Corning · updated

Get Corning's live signals in Claude or ChatGPT, or by API

AskWhat changed at Corning this week? Use Autobound signals for corning.com.

What happened

Post: "Cable management/routing"

Source

RedditNov 9, 2026By u/ProfileOk4085

r/FiberOptics

Cable management/routing

upvotes
16
comments
18

Extracted from these lines

  • [comment u/this-is-NOT-the-way1] We put multiple customers in the same enclosure. I use Corning panels. CCH line, first thing I do is take out the slack management pieces.

  • [comment u/Formal_Substance_687] Those corning stub trays kinda suck

reddit.com/r/FiberOptics/comments/1xrs22o/cable_managementroutingOpen the source

Comments on the post

5 of 18 comments
  • “Here's what I came up with in a fairly similar drawer with very limited space.”

    u/MadRockthethird10 points · Nov 9, 2026View

  • “This is how I enter these Panduit LIU's. The older 1RU versions used to come with the spiral wrap years ago, not sure why they stopped. I just get it in bulk on Amazon now. I know you're not using trays but my approach would be the same to get from the back to the front. Break out the cables where they can be Velcro'd to the top in the back. These were the longer panduit 24 trays so there wasn't r”

    u/sissyprettylove3 points · Nov 10, 2026View

  • “Just dress them in and cut to length before terninating. Leave yourself enough slack to work comfortably, remake incase of error and not too much that the excessive slack makes getting the lid on difficult.”

    u/wild_haggis852 points · Nov 9, 2026View

  • “I fucking haaaate those panduit LIUs. I’ll secure the cable to the top, then come in through the right just like you did. These things really suck.”

    u/GhettoBike1 points · Nov 9, 2026View

  • “We put multiple customers in the same enclosure. I use Corning panels. CCH line, first thing I do is take out the slack management pieces. I trim out and then Velcro each slack coil separately and tag them each. Service is easy as it’s easy to identify an individual coil and pull out and work on if needed. This guy came in on the right but should have stripped and started the bare fibers on the le”

    u/this-is-NOT-the-way11 points · Nov 9, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/FiberOptics
Event date
Nov 2026

Companies

  • PanduitAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Usability
Link URL
i.redd.it
Virality
Somewhat high
Post kind
Image
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • fiber optics
  • enclosures
  • cable management

Flair

  • Help wanted!

Products named

  • Corning CCH panels
  • stub trays

Extraction

Sentiment
Mixed
Detected
Nov 9, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Corning and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Corning this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/e9777c3f-4541-5f72-aa23-51b368d08bec returns this record as JSON. POST /v1/companies/enrich returns every signal for corning.com.

{
  "signal_id": "e9777c3f-4541-5f72-aa23-51b368d08bec",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-09T13:46:34+00:00",
  "company": {
    "name": "Corning",
    "domain": "corning.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "fiber optics",
      "enclosures",
      "cable management"
    ],
    "post_id": "1xrs22o",
    "summary": "Technicians discuss using Corning CCH panels as an alternative for multi-customer fiber enclosures, though one commenter notes their stub trays are subpar.",
    "category": "usability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdsuxpahbi8/",
        "depth": 0,
        "score": 10,
        "author": "MadRockthethird",
        "excerpt": "Here's what I came up with in a fairly similar drawer with very limited space.",
        "posted_at": "2026-11-09T16:04:31.000Z",
        "author_url": "https://www.reddit.com/user/MadRockthethird/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sej79vvyged/",
        "depth": 0,
        "score": 3,
        "author": "sissyprettylove",
        "excerpt": "This is how I enter these Panduit LIU's. The older 1RU versions used to come with the spiral wrap years ago, not sure why they stopped. I just get it in bulk on Amazon now. I know you're not using trays but my approach would be the same to get from the back to the front. Break out the cables where they can be Velcro'd to the top in the back. These were the longer panduit 24 trays so there wasn't r",
        "posted_at": "2026-11-10T01:55:07.000Z",
        "author_url": "https://www.reddit.com/user/sissyprettylove/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdmw76fwzgk/",
        "depth": 0,
        "score": 2,
        "author": "wild_haggis85",
        "excerpt": "Just dress them in and cut to length before terninating. Leave yourself enough slack to work comfortably, remake incase of error and not too much that the excessive slack makes getting the lid on difficult.",
        "posted_at": "2026-11-09T13:50:46.000Z",
        "author_url": "https://www.reddit.com/user/wild_haggis85/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdnkejzigea/",
        "depth": 0,
        "score": 1,
        "author": "GhettoBike",
        "excerpt": "I fucking haaaate those panduit LIUs. I’ll secure the cable to the top, then come in through the right just like you did. These things really suck.",
        "posted_at": "2026-11-09T14:05:51.000Z",
        "author_url": "https://www.reddit.com/user/GhettoBike/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdnon2itpxd/",
        "depth": 0,
        "score": 1,
        "author": "this-is-NOT-the-way1",
        "excerpt": "We put multiple customers in the same enclosure. I use Corning panels. CCH line, first thing I do is take out the slack management pieces. I trim out and then Velcro each slack coil separately and tag them each. Service is easy as it’s easy to identify an individual coil and pull out and work on if needed. This guy came in on the right but should have stripped and started the bare fibers on the le",
        "posted_at": "2026-11-09T14:08:29.000Z",
        "author_url": "https://www.reddit.com/user/this-is-NOT-the-way1/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdnfdgprm9u/",
        "depth": 0,
        "score": 1,
        "author": "Formal_Substance_687",
        "excerpt": "Those corning stub trays kinda suck",
        "posted_at": "2026-11-09T14:02:43.000Z",
        "author_url": "https://www.reddit.com/user/Formal_Substance_687/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19seblmiw8b5v/",
        "depth": 0,
        "score": 1,
        "author": "JSRFNFJR",
        "excerpt": "I enter where I wrote in red I also remove the slack rings I pointed in blue. Separate the fibers tag them and use Velcro to hold them in place onece you got enough slack to slide the drawer out put one of the slack rings back. It will keep it looking like spaghetti",
        "posted_at": "2026-11-09T23:04:42.000Z",
        "author_url": "https://www.reddit.com/user/JSRFNFJR/"
      },
      {
        "url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/comment/19sdmw2daycn7/",
        "depth": 0,
        "score": 0,
        "author": "TomRILReddit",
        "excerpt": "Just a poorly engineered product.",
        "posted_at": "2026-11-09T13:50:41.000Z",
        "author_url": "https://www.reddit.com/user/TomRILReddit/"
      }
    ],
    "evidence": [
      "[comment u/this-is-NOT-the-way1] We put multiple customers in the same enclosure. I use Corning panels. CCH line, first thing I do is take out the slack management pieces.",
      "[comment u/Formal_Substance_687] Those corning stub trays kinda suck"
    ],
    "link_url": "https://i.redd.it/gl6o4a6vcl0i1.jpeg",
    "virality": "somewhat_high",
    "image_url": "https://i.redd.it/gl6o4a6vcl0i1.jpeg",
    "post_date": "2026-11-09T13:46:34.000Z",
    "post_kind": "image",
    "sentiment": "mixed",
    "subreddit": "FiberOptics",
    "event_date": "2026-11",
    "post_flair": [
      "Help wanted!"
    ],
    "post_title": "Cable management/routing",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/FiberOptics/comments/1xrs22o/cable_managementrouting/",
    "entity_role": "vendor",
    "post_author": "ProfileOk4085",
    "upvote_ratio": 0.9444444444444444,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/FiberOptics/",
    "total_upvotes": 16,
    "comments_total": 18,
    "total_comments": 18,
    "other_companies": [
      {
        "name": "Panduit",
        "role": "competitor",
        "domain": "panduit.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/ProfileOk4085/",
    "signal_category": "feedback",
    "comments_included": 8,
    "products_mentioned": [
      "Corning CCH panels",
      "stub trays"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.