Skip to main content
NetAppCustomer feedback

A customer is performing a storage capacity expansion on an existing NetApp AFF-A200 array by adding six drives across nodes and seeking guidance on disk assignment and aggregate expansion procedures.

Source: Autobound Signal API · 131 signals tracked for NetApp · updated

Get NetApp's live signals in Claude or ChatGPT, or by API

AskWhat changed at NetApp this week? Use Autobound signals for netapp.com.

What happened

Post: "NetApp AFF-A200 storage capacity expansion"

Source

RedditNov 13, 2026By u/Particular-Sound-470

r/netapp

NetApp AFF-A200 storage capacity expansion

upvotes
2
comments
9

Post

Highlighted: the lines this signal was extracted from

We were doing a storage capacity expansion on AFF-200. So we have 12 drives on existing NetApp and wanted add 6 drives, followed the NetApp Best practices to add drives KB article https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Best_practices_for_adding_disks_to_an_existing_shelf_or_clusterI manually assigned owner as nodes A and B 3 drives each...i do see the drives in the spare pool, not in the partitioned spares. I ran the simulation "storage aggregate add-disks -aggregate NetApp_A_Aggr1 -diskcount 3 -simulate true" and it came as success. Question: I'm following the right process? if not can you please help point me to right direction to add disks to the existing shelf and aggregate? Also do we need to add the 6 disks to each aggregate? or just 3 (owner of the disk)

reddit.com/r/netapp/comments/1xuvq12/netapp_affa200_storage_capacity_...Read the full source

Comments on the post

4 of 9 comments
  • “If your system is properly set up as an AFF, all you need to do is insert the disks. Wait a few minutes. ONTAP will auto assign For this to work, the original drives should have been distributed from the outside in. One node should have owned disks 0-5 and the other node should have owned 18-23 When you add six drives into 6-8 and 15-17, they will auto assign. You can pre partition the drive”

    u/tmacmd3 points · Nov 13, 2026View

  • “ONTAP will use at least RAID 4. IT will default to RAID-DP or RAID-TEC with larger spinning drives In order to build any data aggregate like that requires some level of stupid”

    u/tmacmd2 points · Nov 13, 2026View

  • “And those are SSD drives, right? AFF models won’t take HDD, if I remember correctly.”

    u/ProgressBartender1 points · Nov 13, 2026View

  • “The doofus that built ours built no parity on one of the tiers… I tossed the new drive in and let it automatically assign them, it did so and I still have no parity. I’m going to have to move the data now and rebuild the bad tier… problem is I will need to spend money to do so, or cut over to our DR site to make it happen :(”

    u/kennyj20111 points · Nov 13, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/netapp
Event date
Nov 2026

The full record

From the Signal API record

Numbers

Mentions
2

Details

Timing
In progress
Category
Implementation
Virality
Low
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • implementation
  • hardware
  • storage
  • ontap

Products named

  • AFF-A200
  • ONTAP

Extraction

Sentiment
Neutral
Detected
Nov 13, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for NetApp and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at NetApp this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/e0526d9c-1a46-5dba-ac1b-b7412f9a4e81 returns this record as JSON. POST /v1/companies/enrich returns every signal for netapp.com.

{
  "signal_id": "e0526d9c-1a46-5dba-ac1b-b7412f9a4e81",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-13T02:13:44+00:00",
  "company": {
    "name": "NetApp",
    "domain": "netapp.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "in_progress",
    "topics": [
      "storage",
      "implementation",
      "hardware",
      "ontap"
    ],
    "post_id": "1xuvq12",
    "summary": "A customer is performing a storage capacity expansion on an existing NetApp AFF-A200 array by adding six drives across nodes and seeking guidance on disk assignment and aggregate expansion procedures.",
    "category": "implementation",
    "comments": [
      {
        "url": "https://www.reddit.com/r/netapp/comments/1xuvq12/comment/19sjyu6fnpr8j/",
        "depth": 0,
        "score": 3,
        "author": "tmacmd",
        "excerpt": "If your system is properly set up as an AFF, all you need to do is insert the disks. Wait a few minutes. ONTAP will auto assign\n\n For this to work, the original drives should have been distributed from the outside in.\nOne node should have owned disks 0-5 and the other node should have owned 18-23\n\n When you add six drives into 6-8 and 15-17, they will auto assign.\n\n You can pre partition the drive",
        "posted_at": "2026-11-13T03:01:19.000Z",
        "author_url": "https://www.reddit.com/user/tmacmd/"
      },
      {
        "url": "https://www.reddit.com/r/netapp/comments/1xuvq12/comment/19sk2e6abfkm9/",
        "depth": 0,
        "score": 2,
        "author": "tmacmd",
        "excerpt": "ONTAP will use at least RAID 4. IT will default to RAID-DP or RAID-TEC with larger spinning drives\n\n In order to build any data aggregate like that requires some level of stupid",
        "posted_at": "2026-11-13T04:21:02.000Z",
        "author_url": "https://www.reddit.com/user/tmacmd/"
      },
      {
        "url": "https://www.reddit.com/r/netapp/comments/1xuvq12/comment/19skgpfkt1gyq/",
        "depth": 0,
        "score": 1,
        "author": "ProgressBartender",
        "excerpt": "And those are SSD drives, right? AFF models won’t take HDD, if I remember correctly.",
        "posted_at": "2026-11-13T09:41:55.000Z",
        "author_url": "https://www.reddit.com/user/ProgressBartender/"
      },
      {
        "url": "https://www.reddit.com/r/netapp/comments/1xuvq12/comment/19sjztu5ewisj/",
        "depth": 0,
        "score": 1,
        "author": "kennyj2011",
        "excerpt": "The doofus that built ours built no parity on one of the tiers… I tossed the new drive in and let it automatically assign them, it did so and I still have no parity. I’m going to have to move the data now and rebuild the bad tier… problem is I will need to spend money to do so, or cut over to our DR site to make it happen :(",
        "posted_at": "2026-11-13T03:23:31.000Z",
        "author_url": "https://www.reddit.com/user/kennyj2011/"
      }
    ],
    "evidence": [
      "[post] We were doing a storage capacity expansion on AFF-200. So we have 12 drives on existing NetApp and wanted add 6 drives, followed the NetApp Best practices to add drives KB article",
      "[post] Question: I'm following the right process? if not can you please help point me to right direction to add disks to the existing shelf and aggregate?"
    ],
    "virality": "low",
    "post_date": "2026-11-13T02:13:44.000Z",
    "post_kind": "text",
    "post_text": "We were doing a storage capacity expansion on AFF-200. So we have 12 drives on existing NetApp and wanted add 6 drives, followed the NetApp Best practices to add drives KB article https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Best_practices_for_adding_disks_to_an_existing_shelf_or_clusterI manually assigned owner as nodes A and B 3 drives each...i do see the drives in the spare pool, not in the partitioned spares. I ran the simulation \"storage aggregate add-disks -aggregate NetApp_A_Aggr1 -diskcount 3 -simulate true\" and it came as success.\n\nQuestion: I'm following the right process? if not can you please help point me to right direction to add disks to the existing shelf and aggregate?\n\nAlso do we need to add the 6 disks to each aggregate? or just 3 (owner of the disk)",
    "sentiment": "neutral",
    "subreddit": "netapp",
    "event_date": "2026-11",
    "post_title": "NetApp AFF-A200 storage capacity expansion",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/netapp/comments/1xuvq12/netapp_affa200_storage_capacity_expansion/",
    "entity_role": "vendor",
    "post_author": "Particular-Sound-470",
    "upvote_ratio": 1,
    "mention_count": 2,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/netapp/",
    "total_upvotes": 2,
    "comments_total": 9,
    "total_comments": 9,
    "event_date_text": "We were doing",
    "post_author_url": "https://www.reddit.com/user/Particular-Sound-470/",
    "signal_category": "feedback",
    "comments_included": 4,
    "products_mentioned": [
      "AFF-A200",
      "ONTAP"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.