Skip to main content
OtisCustomer feedback

An elevator building customer in New York City reports severe dissatisfaction with Otis maintenance after technicians have failed for three months to fix an elevator stuck in the overhead.

Source: Autobound Signal API · 65 signals tracked for Otis · updated

Get Otis' live signals in Claude or ChatGPT, or by API

AskWhat changed at Otis this week? Use Autobound signals for otis.com.

What happened

Post: "Elevator stuck in the overhead"

Source

RedditNov 12, 2026By u/Turbulent-Piano-5365

r/Elevators

Elevator stuck in the overhead

upvotes
6
comments
43

Post

Highlighted: the lines this signal was extracted from

I’m not totally sure what I’m hoping for here, but I’m dealing with an elevator that has been stuck on the finals for 3 months and I’m losing my mind. They can’t get it to come down. They replaced the drive and now they can’t get it to learn the encoder. They come every two weeks to try the exact same thing that doesn’t work. It’s a Hollister Whitney machine with Elevator Controls Corporation boards and a Magnetek controller. No one at Otis (who installed it) knows how the thing works, and no one at Elevator Controls answers the phone. I’m in New York City. Surely there’s someone in this entire city competent to deal with this. I am literally and figuratively stuck, and I’d love any suggestions on getting unstuck.

reddit.com/r/Elevators/comments/1xuqbny/elevator_stuck_in_the_overheadRead the full source

Comments on the post

5 of 43 comments
  • “Have you tried turning it off and on again?”

    u/ProllySaid18 points · Nov 13, 2026View

  • “I’d be losing faith fast if they can’t figure out how to get an EC to move without an encoder, I’d be losing it even faster if it’s a pixel controller.”

    u/FuckWit_1_Actual13 points · Nov 13, 2026View

  • “Elevator helper me that used to hand crank those Hollister machines is chuckling inside right now. Also crying remembering all the times I've had to host a car off safeties in the overhead after an apprentice "tied them off". They are dealing with 3rd party equipment, so why they haven't phoned magnatek for assistance only they can answer that”

    u/BremboD6 points · Nov 13, 2026View

  • “Sounds like you need a ton of scaffolding. If it truly is on its safeties. But if its an encoder issue EC should be able to make it move if they ever call back to otis.”

    u/_andthereiwas5 points · Nov 12, 2026View

  • “Is changing your elevator company an option? Elevator Controls controllers can be a PITA but they do call back if they are busy I cant see them not responding at all.”

    u/DetailAccomplished265 points · Nov 13, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/Elevators
Stage
Considering
Event date
Nov 2026

Companies

  • Elevator Controls CorporationAlso named
  • Hollister-WhitneyAlso named
  • MagnetekAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Support
Virality
Somewhat high
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • maintenance
  • elevator service
  • support

Extraction

Sentiment
Negative
Detected
Nov 12, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Otis and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Otis this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/bc113fde-4a3a-59a1-a4a4-1cbceeb97fc3 returns this record as JSON. POST /v1/companies/enrich returns every signal for otis.com.

{
  "signal_id": "bc113fde-4a3a-59a1-a4a4-1cbceeb97fc3",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-12T22:09:50+00:00",
  "company": {
    "name": "Otis",
    "domain": "otis.com"
  },
  "data": {
    "nsfw": false,
    "stage": "considering",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "maintenance",
      "elevator service",
      "support"
    ],
    "post_id": "1xuqbny",
    "summary": "An elevator building customer in New York City reports severe dissatisfaction with Otis maintenance after technicians have failed for three months to fix an elevator stuck in the overhead.",
    "category": "support",
    "comments": [
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sk40d5elhgg/",
        "depth": 0,
        "score": 18,
        "author": "ProllySaid",
        "excerpt": "Have you tried turning it off and on again?",
        "posted_at": "2026-11-13T04:57:16.000Z",
        "author_url": "https://www.reddit.com/user/ProllySaid/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjv6d8tpwgy/",
        "depth": 0,
        "score": 13,
        "author": "FuckWit_1_Actual",
        "excerpt": "I’d be losing faith fast if they can’t figure out how to get an EC to move without an encoder, I’d be losing it even faster if it’s a pixel controller.",
        "posted_at": "2026-11-13T01:39:13.000Z",
        "author_url": "https://www.reddit.com/user/FuckWit_1_Actual/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjxsvd1ms9s/",
        "depth": 0,
        "score": 6,
        "author": "BremboD",
        "excerpt": "Elevator helper me that used to hand crank those Hollister machines is chuckling inside right now. Also crying remembering all the times I've had to host a car off safeties in the overhead after an apprentice \"tied them off\".\n\n They are dealing with 3rd party equipment, so why they haven't phoned magnatek for assistance only they can answer that",
        "posted_at": "2026-11-13T02:38:05.000Z",
        "author_url": "https://www.reddit.com/user/BremboD/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjmhx6wdtb8/",
        "depth": 0,
        "score": 5,
        "author": "_andthereiwas",
        "excerpt": "Sounds like you need a ton of scaffolding. If it truly is on its safeties. But if its an encoder issue EC should be able to make it move if they ever call back to otis.",
        "posted_at": "2026-11-12T22:24:38.000Z",
        "author_url": "https://www.reddit.com/user/_andthereiwas/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjs2egwirvn/",
        "depth": 0,
        "score": 5,
        "author": "DetailAccomplished26",
        "excerpt": "Is changing your elevator company an option? Elevator Controls controllers can be a PITA but they do call back if they are busy I cant see them not responding at all.",
        "posted_at": "2026-11-13T00:29:30.000Z",
        "author_url": "https://www.reddit.com/user/DetailAccomplished26/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjmxct3t09s/",
        "depth": 0,
        "score": 3,
        "author": "freedoesntexist",
        "excerpt": "Mod time",
        "posted_at": "2026-11-12T22:34:15.000Z",
        "author_url": "https://www.reddit.com/user/freedoesntexist/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19sjm1pv2iisg/",
        "depth": 0,
        "score": 2,
        "author": "Notafriend2you",
        "excerpt": "What company do you work for?",
        "posted_at": "2026-11-12T22:14:33.000Z",
        "author_url": "https://www.reddit.com/user/Notafriend2you/"
      },
      {
        "url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/comment/19skv48crkzvk/",
        "depth": 0,
        "score": 2,
        "author": "happygoohnevermind",
        "excerpt": "If you are looking for a new company, call your local hall and they will have recommendations of who you can talk to.",
        "posted_at": "2026-11-13T15:05:01.000Z",
        "author_url": "https://www.reddit.com/user/happygoohnevermind/"
      }
    ],
    "evidence": [
      "[post] dealing with an elevator that has been stuck on the finals for 3 months and I’m losing my mind.",
      "[post] No one at Otis (who installed it) knows how the thing works, and no one at Elevator Controls answers the phone."
    ],
    "virality": "somewhat_high",
    "post_date": "2026-11-12T22:09:50.000Z",
    "post_kind": "text",
    "post_text": "I’m not totally sure what I’m hoping for here, but I’m dealing with an elevator that has been stuck on the finals for 3 months and I’m losing my mind.\n\nThey can’t get it to come down. They replaced the drive and now they can’t get it to learn the encoder. They come every two weeks to try the exact same thing that doesn’t work.\n\nIt’s a Hollister Whitney machine with Elevator Controls Corporation boards and a Magnetek controller. No one at Otis (who installed it) knows how the thing works, and no one at Elevator Controls answers the phone.\n\nI’m in New York City. Surely there’s someone in this entire city competent to deal with this.\n\nI am literally and figuratively stuck, and I’d love any suggestions on getting unstuck.",
    "sentiment": "negative",
    "subreddit": "Elevators",
    "event_date": "2026-11",
    "post_title": "Elevator stuck in the overhead",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/Elevators/comments/1xuqbny/elevator_stuck_in_the_overhead/",
    "entity_role": "vendor",
    "post_author": "Turbulent-Piano-5365",
    "upvote_ratio": 0.75,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/Elevators/",
    "total_upvotes": 6,
    "comments_total": 43,
    "total_comments": 43,
    "event_date_text": "3 months",
    "other_companies": [
      {
        "name": "Elevator Controls Corporation",
        "role": "partner",
        "domain": "vantageelevation.com"
      },
      {
        "name": "Hollister-Whitney",
        "role": "partner",
        "domain": "vantageelevation.com"
      },
      {
        "name": "Magnetek",
        "role": "partner",
        "domain": "cmco.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Turbulent-Piano-5365/",
    "signal_category": "feedback",
    "comments_included": 14
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.