Skip to main content
SonyCustomer feedback

Sony FX3 camera users encounter network connection failures and 'CAT cable not recognized' physical link negotiation errors when trying to connect via USB-C ethernet adapters in broadcast van...

Source: Autobound Signal API · 119 signals tracked for Sony · updated

Get Sony's live signals in Claude or ChatGPT, or by API

AskWhat changed at Sony this week? Use Autobound signals for sony.com.

What happened

Sony FX3 camera users encounter network connection failures and 'CAT cable not recognized' physical link negotiation errors when trying to connect via USB-C ethernet adapters in broadcast van environments.

Source

RedditNov 9, 2026By u/Little_Post631

r/broadcastengineering

FX 3 Network Troubleshooting

upvotes
4
comments
5

Post

Highlighted: the lines this signal was extracted from

Hey guys. So I have an upcoming project with 16 Cameras, 3 of them FX3s. I have some Skaarhoj RCP Pros. A few days ago I testet the setup. Laptop, PoE Switch, Skaarhoj RCP and the FX3 in one network and it worked pretty well and semeless. I also tried rebooting the camera a few times to see if it still works or not. It worked well, startet to build the connection pretty instantly. Well today I wanted to install the Setup in the Broadcast Van to make sure everything works in our network. To make things short. Nothing worked. After an hour of trying different things, I also tried the setup I tested with, nothing worked. I changed the cable, switch, usb-c network adapter.. nothing. I also tried resetting the network settings. The camera connects to a network, but seems to have no traffic, only error code I get is: "CAT cable not recognized" but I obviously tested with a few different cables. Any leads? Worst case the operators have to oull iris themselfs, but I hate to give up on somethign like that, it could be such a nice tool if it did work. Thanks in advance you guys

Also quoted as evidence

  • [comment u/Instalia_av] That specific "CAT cable not recognized" message means the FX3's USB-C controller is failing physical link negotiation before IP or ping even enter the picture.

reddit.com/r/broadcastengineering/comments/1xrzm6o/fx_3_network_troub...Read the full source

Comments on the post

3 of 5 comments
  • “https://www.reddit.com/r/VIDEOENGINEERING/s/EPUW6ZrzLG I kinda found the problem yesterday. But there basically was none 😅 I keep you guys updated if I find out what was wrong”

    u/Little_Post6311 points · Nov 12, 2026View

  • “Nothing works is pretty bland. Always start with the basics. Can you ping devices, etc”

    u/lfstudios101 points · Nov 11, 2026View

  • “That specific "CAT cable not recognized" message means the FX3's USB-C controller is failing physical link negotiation before IP or ping even enter the picture. Broadcast van switches often have stricter port security, PoE sensing, or Energy Efficient Ethernet (EEE) enabled compared to a bench test switch; try locking the van switch port manually to 100Mbps Full Duplex with PoE and EEE disabled, a”

    u/Instalia_av1 points · Nov 12, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/broadcastengineering
Event date
Nov 2026

Companies

  • SKAARHOJAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Reliability
Virality
Low
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • broadcasting
  • networking
  • hardware
  • cameras

Products named

  • FX3

Extraction

Sentiment
Negative
Detected
Nov 9, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Sony and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Sony this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/977ece24-7e4d-525b-ae84-59229a70a61b returns this record as JSON. POST /v1/companies/enrich returns every signal for sony.com.

{
  "signal_id": "977ece24-7e4d-525b-ae84-59229a70a61b",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-09T18:31:56+00:00",
  "company": {
    "name": "Sony",
    "domain": "sony.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "broadcasting",
      "networking",
      "cameras",
      "hardware"
    ],
    "post_id": "1xrzm6o",
    "summary": "Sony FX3 camera users encounter network connection failures and 'CAT cable not recognized' physical link negotiation errors when trying to connect via USB-C ethernet adapters in broadcast van environments.",
    "category": "reliability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xrzm6o/comment/19sii0khtm7b4/",
        "depth": 0,
        "score": 1,
        "author": "Little_Post631",
        "excerpt": "https://www.reddit.com/r/VIDEOENGINEERING/s/EPUW6ZrzLG\n\n I kinda found the problem yesterday. But there basically was none 😅\n\n I keep you guys updated if I find out what was wrong",
        "posted_at": "2026-11-12T07:17:02.000Z",
        "author_url": "https://www.reddit.com/user/Little_Post631/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xrzm6o/comment/19shyiq9lfkp1/",
        "depth": 0,
        "score": 1,
        "author": "lfstudios10",
        "excerpt": "Nothing works is pretty bland. Always start with the basics. Can you ping devices, etc",
        "posted_at": "2026-11-11T23:59:56.000Z",
        "author_url": "https://www.reddit.com/user/lfstudios10/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xrzm6o/comment/19si7m7foet8j/",
        "depth": 0,
        "score": 1,
        "author": "Instalia_av",
        "excerpt": "That specific \"CAT cable not recognized\" message means the FX3's USB-C controller is failing physical link negotiation before IP or ping even enter the picture. Broadcast van switches often have stricter port security, PoE sensing, or Energy Efficient Ethernet (EEE) enabled compared to a bench test switch; try locking the van switch port manually to 100Mbps Full Duplex with PoE and EEE disabled, a",
        "posted_at": "2026-11-12T03:23:53.000Z",
        "author_url": "https://www.reddit.com/user/Instalia_av/"
      }
    ],
    "evidence": [
      "[post] The camera connects to a network, but seems to have no traffic, only error code I get is: \"CAT cable not recognized\" but I obviously tested with a few different cables.",
      "[comment u/Instalia_av] That specific \"CAT cable not recognized\" message means the FX3's USB-C controller is failing physical link negotiation before IP or ping even enter the picture."
    ],
    "virality": "low",
    "post_date": "2026-11-09T18:31:56.000Z",
    "post_kind": "text",
    "post_text": "Hey guys.\n\nSo I have an upcoming project with 16 Cameras, 3 of them FX3s. I have some Skaarhoj RCP Pros.\n\nA few days ago I testet the setup. Laptop, PoE Switch, Skaarhoj RCP and the FX3 in one network and it worked pretty well and semeless. I also tried rebooting the camera a few times to see if it still works or not. It worked well, startet to build the connection pretty instantly.\n\nWell today I wanted to install the Setup in the Broadcast Van to make sure everything works in our network. To make things short. Nothing worked. After an hour of trying different things, I also tried the setup I tested with, nothing worked. I changed the cable, switch, usb-c network adapter.. nothing. I also tried resetting the network settings.\n\nThe camera connects to a network, but seems to have no traffic, only error code I get is: \"CAT cable not recognized\" but I obviously tested with a few different cables.\n\nAny leads? Worst case the operators have to oull iris themselfs, but I hate to give up on somethign like that, it could be such a nice tool if it did work. Thanks in advance you guys",
    "sentiment": "negative",
    "subreddit": "broadcastengineering",
    "event_date": "2026-11",
    "post_title": "FX 3 Network Troubleshooting",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/broadcastengineering/comments/1xrzm6o/fx_3_network_troubleshooting/",
    "entity_role": "vendor",
    "post_author": "Little_Post631",
    "upvote_ratio": 1,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/broadcastengineering/",
    "total_upvotes": 4,
    "comments_total": 5,
    "total_comments": 5,
    "event_date_text": "today",
    "other_companies": [
      {
        "name": "SKAARHOJ",
        "role": "partner",
        "domain": "skaarhoj.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Little_Post631/",
    "signal_category": "feedback",
    "comments_included": 3,
    "products_mentioned": [
      "FX3"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.