Skip to main content
TrimbleCustomer feedback

A user reports using Trimble Business Center for earthworks and cut and fill calculations, noting success on parking lot projects despite its heavy civil and roadway focus.

Source: Autobound Signal API · 111 signals tracked for Trimble · updated

Get Trimble's live signals in Claude or ChatGPT, or by API

AskWhat changed at Trimble this week? Use Autobound signals for trimble.com.

What happened

Post: "Planswift is NOT for grading !"

Source

RedditNov 14, 2026By u/Estimation_Engineer

r/estimators

Planswift is NOT for grading !

upvotes
4
comments
11

Post

Hey all, I had a long argument with one of my client’s site engineers. He wanted me to prepare a land fill and cut takeoff using PlanSwift, as all his other takeoffs are prepared in PlanSwift and he is comfortable using PlanSwift files to review them. In my opinion, doing grading in PlanSwift is unprofessional and inaccurate. There is specific software for grading that can actually record contours and give accurate values. Is anyone here using PlanSwift for grading? And if you are using a proper grading tool or software, kindly recommend something good.

Extracted from these lines

  • [comment u/Ghost-Of-Akina] My office uses Trimble Business Center for earthworks/ cut and fills. Though it's more tailored towards heavy civil / roadway projects. But I've used it for cut and fill for parking lots of buildings with some success.

reddit.com/r/estimators/comments/1xw1sjd/planswift_is_not_for_gradingRead the full source

Comments on the post

5 of 11 comments
  • “architect here so not an estimator, but i’ve seen the same split. planswift can do cut/fill off digitized contours, but you’re only as accurate as your tracing. for anything a site engineer is gonna review i’d want a proper triangulated surface, civil 3d or trimble business center or agtek type stuff”

    u/Travisher44 points · Nov 14, 2026View

  • “Planswift is good for takeoff and measurements Grading should be done using a different software i currently use Earthworks by Trackware and kubla cubed. I would recommend kubla as it's easier to build the existing and proposed models obviously they're others as well agtek, trimble,civil 3d but I found the above 2 softwares to be most cost effective and accurate”

    u/darknight0123 points · Nov 14, 2026View

  • “My office uses Trimble Business Center for earthworks/ cut and fills. Though it's more tailored towards heavy civil / roadway projects. But I've used it for cut and fill for parking lots of buildings with some success.”

    u/Ghost-Of-Akina2 points · Nov 14, 2026View

  • “Old school. Excel / gridded plans. Cut/fill/oex As close as anyone if you are knowledgeable in earthwork”

    u/jgturbo6192 points · Nov 15, 2026View

  • “You can most definitely use planswift for an earthwork takeoff. The only thing unprofessional and inaccurate is you calling it a “fill and cut takeoff””

    u/rivercowboy22 points · Nov 15, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/estimators

Companies

  • PlanSwiftAlso named

The full record

From the Signal API record

Numbers

Mentions
3

Details

Timing
Ongoing state
Category
Features
Virality
Medium
Post kind
Text
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • construction
  • civil engineering
  • cut and fill

Products named

  • Trimble Business Center

Extraction

Sentiment
Positive
Detected
Nov 14, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Trimble and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Trimble this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/9d2ca703-8f1a-5a0a-a509-353835dc0bf2 returns this record as JSON. POST /v1/companies/enrich returns every signal for trimble.com.

{
  "signal_id": "9d2ca703-8f1a-5a0a-a509-353835dc0bf2",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-14T12:57:46+00:00",
  "company": {
    "name": "Trimble",
    "domain": "trimble.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "construction",
      "civil engineering",
      "cut and fill"
    ],
    "post_id": "1xw1sjd",
    "summary": "A user reports using Trimble Business Center for earthworks and cut and fill calculations, noting success on parking lot projects despite its heavy civil and roadway focus.",
    "category": "features",
    "comments": [
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19smoke9vz17o/",
        "depth": 0,
        "score": 4,
        "author": "Travisher4",
        "excerpt": "architect here so not an estimator, but i’ve seen the same split. planswift can do cut/fill off digitized contours, but you’re only as accurate as your tracing. for anything a site engineer is gonna review i’d want a proper triangulated surface, civil 3d or trimble business center or agtek type stuff",
        "posted_at": "2026-11-14T15:32:24.000Z",
        "author_url": "https://www.reddit.com/user/Travisher4/"
      },
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19smjva5s6va9/",
        "depth": 0,
        "score": 3,
        "author": "darknight012",
        "excerpt": "Planswift is good for takeoff and measurements Grading should be done using a different software i currently use Earthworks by Trackware and kubla cubed. I would recommend kubla as it's easier to build the existing and proposed models obviously they're others as well agtek, trimble,civil 3d but I found the above 2 softwares to be most cost effective and accurate",
        "posted_at": "2026-11-14T13:47:05.000Z",
        "author_url": "https://www.reddit.com/user/darknight012/"
      },
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19smtwwbhfxes/",
        "depth": 0,
        "score": 2,
        "author": "Ghost-Of-Akina",
        "excerpt": "My office uses Trimble Business Center for earthworks/ cut and fills. Though it's more tailored towards heavy civil / roadway projects. But I've used it for cut and fill for parking lots of buildings with some success.",
        "posted_at": "2026-11-14T17:32:17.000Z",
        "author_url": "https://www.reddit.com/user/Ghost-Of-Akina/"
      },
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19sndrzo0f4dd/",
        "depth": 0,
        "score": 2,
        "author": "jgturbo619",
        "excerpt": "Old school.\nExcel / gridded plans.\nCut/fill/oex\nAs close as anyone if you are knowledgeable in earthwork",
        "posted_at": "2026-11-15T00:57:38.000Z",
        "author_url": "https://www.reddit.com/user/jgturbo619/"
      },
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19snhcclxzaas/",
        "depth": 0,
        "score": 2,
        "author": "rivercowboy2",
        "excerpt": "You can most definitely use planswift for an earthwork takeoff. The only thing unprofessional and inaccurate is you calling it a “fill and cut takeoff”",
        "posted_at": "2026-11-15T02:17:34.000Z",
        "author_url": "https://www.reddit.com/user/rivercowboy2/"
      },
      {
        "url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/comment/19snmo4apro4h/",
        "depth": 0,
        "score": 1,
        "author": "6174gunner",
        "excerpt": "If someone is confident doing to work in their system and they’ve proven to be reliable, I don’t care if they’re using an abacus to takeoff grading. You don’t really get to say it’s not right for someone else.\n\n If someone is telling you to do a takeoff that you aren’t comfortable with, that’s a different story.\n\n I don’t see you getting recommendations and then telling this engineer to go use som",
        "posted_at": "2026-11-15T04:17:00.000Z",
        "author_url": "https://www.reddit.com/user/6174gunner/"
      }
    ],
    "evidence": [
      "[comment u/Ghost-Of-Akina] My office uses Trimble Business Center for earthworks/ cut and fills. Though it's more tailored towards heavy civil / roadway projects. But I've used it for cut and fill for parking lots of buildings with some success."
    ],
    "virality": "medium",
    "post_date": "2026-11-14T12:57:46.000Z",
    "post_kind": "text",
    "post_text": "Hey all, I had a long argument with one of my client’s site engineers. He wanted me to prepare a land fill and cut takeoff using PlanSwift, as all his other takeoffs are prepared in PlanSwift and he is comfortable using PlanSwift files to review them.\n\nIn my opinion, doing grading in PlanSwift is unprofessional and inaccurate. There is specific software for grading that can actually record contours and give accurate values.\n\nIs anyone here using PlanSwift for grading? And if you are using a proper grading tool or software, kindly recommend something good.",
    "sentiment": "positive",
    "subreddit": "estimators",
    "post_title": "Planswift is NOT for grading !",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/estimators/comments/1xw1sjd/planswift_is_not_for_grading/",
    "entity_role": "vendor",
    "post_author": "Estimation_Engineer",
    "upvote_ratio": 0.75,
    "mention_count": 3,
    "mention_surge": true,
    "subreddit_url": "https://www.reddit.com/r/estimators/",
    "total_upvotes": 4,
    "comments_total": 11,
    "total_comments": 11,
    "other_companies": [
      {
        "name": "PlanSwift",
        "role": "alternative",
        "domain": "planswift.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Estimation_Engineer/",
    "signal_category": "feedback",
    "comments_included": 6,
    "products_mentioned": [
      "Trimble Business Center"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.