Skip to main content
WatersCustomer feedback

A mass spectrometry user and commenter report limitations in Waters software, criticizing its inability to easily combine multi-shot MS/MS spectra directly.

Source: Autobound Signal API · 72 signals tracked for Waters · updated

Get Waters' live signals in Claude or ChatGPT, or by API

AskWhat changed at Waters this week? Use Autobound signals for waters.com.

What happened

Post: "Help with combining MS2 spectra"

Source

RedditNov 10, 2026By u/mikymikes95

r/massspectrometry

Help with combining MS2 spectra

upvotes
1
comments
6

Post

Highlighted: the lines this signal was extracted from

Hey everyone! I'm new to mass spectrometry and could use some advice on processing some MS/MS data. I have a compound of interest with a precursor ion at m/z 582.4066. Unfortunately, ESI was not available, so we tried acquiring the MS/MS spectra using laser desorption/ionization (LDI). the thing is, the instrument is configured to perform multiple laser shots (62 in total) at "parts" of the spot on the stainless-steel target plate, presumably to account for variability in ionization and improve reproducibility. The result is that I now have 62 individual MS/MS spectra for the same precursor ion. My question is: Is there a way to combine these 62 spectra into a single "consensus MS/MS spectrum"? data is from a Waters Synapt XS HDMS equipment, and i been visualizing data in MZmine 4.10.6, but cant find a way to combine the spectra. I'm not familiar with MS/MS processing to know what would be the best approach. Thanks!

Also quoted as evidence

  • [comment u/EducationalMix4648] Unfortunately Waters software isn't great, so you'll likely need to use something open source. Some of the other vendors allow acquisitions like this to be combined, but I don't think Waters does.

reddit.com/r/massspectrometry/comments/1xss5le/help_with_combining_ms...Read the full source

Comments on the post

4 of 6 comments
  • “Unfortunately Waters software isn't great, so you'll likely need to use something open source. Some of the other vendors allow acquisitions like this to be combined, but I don't think Waters does. You're probably better off just setting up the acquisition properly and re-running the samples.”

    u/EducationalMix46482 points · Nov 10, 2026View

  • “Since these are shots from different spots, I'd check repeatability before averaging: compare precursor and major-fragment intensities across all 62, and see whether a few spectra are outliers or the fragmentation pattern changes by spot. I wouldn't drop every low-TIC scan automatically, since that can bias toward the brightest spots. Once they look comparable, a median or mean on the common m/z g”

    u/QSCpeptidology2 points · Nov 10, 2026View

  • “Convert to mzML and then do a python script with pymzML. Then you will be able to check TIC across scans/spectra to try to remove low intensity ones or poor quality (if this is an issue?). Once you have that you can try to average the spectrum. Is it continuum/profile or centroid mode?”

    u/EarlDwolanson1 points · Nov 10, 2026View

  • “So what you want to do to get you "consensus MS/MS spectrum" is usually called "aligning" (to match peaks that vary only slightly in measured m/z) and "averaging". I'm afraid I also can't help you with the specific software, but worst case you can export the peak list as a table and do it manually (I'm sure there is also some R library or python package for this). Probably not the answer you were”

    u/purplethron1 points · Nov 10, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/massspectrometry
Event date
Nov 2026

The full record

From the Signal API record

Numbers

Mentions
2

Details

Timing
Ongoing state
Category
Features
Virality
Very low
Post kind
Text
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • mass spectrometry
  • software
  • data processing

Products named

  • Waters Synapt XS HDMS

Extraction

Sentiment
Negative
Detected
Nov 10, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Waters and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Waters this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/17e1b339-20fb-5063-aaf4-46f45c16e95f returns this record as JSON. POST /v1/companies/enrich returns every signal for waters.com.

{
  "signal_id": "17e1b339-20fb-5063-aaf4-46f45c16e95f",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-11-10T16:57:24+00:00",
  "company": {
    "name": "Waters",
    "domain": "waters.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "mass spectrometry",
      "software",
      "data processing"
    ],
    "post_id": "1xss5le",
    "summary": "A mass spectrometry user and commenter report limitations in Waters software, criticizing its inability to easily combine multi-shot MS/MS spectra directly.",
    "category": "features",
    "comments": [
      {
        "url": "https://www.reddit.com/r/massspectrometry/comments/1xss5le/comment/19sfq7g00bvb9/",
        "depth": 0,
        "score": 2,
        "author": "EducationalMix4648",
        "excerpt": "Unfortunately Waters software isn't great, so you'll likely need to use something open source. Some of the other vendors allow acquisitions like this to be combined, but I don't think Waters does. You're probably better off just setting up the acquisition properly and re-running the samples.",
        "posted_at": "2026-11-10T17:59:17.000Z",
        "author_url": "https://www.reddit.com/user/EducationalMix4648/"
      },
      {
        "url": "https://www.reddit.com/r/massspectrometry/comments/1xss5le/comment/19sfx2gdtwhtx/",
        "depth": 0,
        "score": 2,
        "author": "QSCpeptidology",
        "excerpt": "Since these are shots from different spots, I'd check repeatability before averaging: compare precursor and major-fragment intensities across all 62, and see whether a few spectra are outliers or the fragmentation pattern changes by spot. I wouldn't drop every low-TIC scan automatically, since that can bias toward the brightest spots. Once they look comparable, a median or mean on the common m/z g",
        "posted_at": "2026-11-10T20:33:07.000Z",
        "author_url": "https://www.reddit.com/user/QSCpeptidology/"
      },
      {
        "url": "https://www.reddit.com/r/massspectrometry/comments/1xss5le/comment/19sfrrxlkejpc/",
        "depth": 0,
        "score": 1,
        "author": "EarlDwolanson",
        "excerpt": "Convert to mzML and then do a python script with pymzML.\n\n Then you will be able to check TIC across scans/spectra to try to remove low intensity ones or poor quality (if this is an issue?). Once you have that you can try to average the spectrum. Is it continuum/profile or centroid mode?",
        "posted_at": "2026-11-10T18:34:28.000Z",
        "author_url": "https://www.reddit.com/user/EarlDwolanson/"
      },
      {
        "url": "https://www.reddit.com/r/massspectrometry/comments/1xss5le/comment/19sfrbh97h5xe/",
        "depth": 0,
        "score": 1,
        "author": "purplethron",
        "excerpt": "So what you want to do to get you \"consensus MS/MS spectrum\" is usually called \"aligning\" (to match peaks that vary only slightly in measured m/z) and \"averaging\". I'm afraid I also can't help you with the specific software, but worst case you can export the peak list as a table and do it manually (I'm sure there is also some R library or python package for this). Probably not the answer you were",
        "posted_at": "2026-11-10T18:24:13.000Z",
        "author_url": "https://www.reddit.com/user/purplethron/"
      }
    ],
    "evidence": [
      "[post] data is from a Waters Synapt XS HDMS equipment, and i been visualizing data in MZmine 4.10.6, but cant find a way to combine the spectra.",
      "[comment u/EducationalMix4648] Unfortunately Waters software isn't great, so you'll likely need to use something open source. Some of the other vendors allow acquisitions like this to be combined, but I don't think Waters does."
    ],
    "virality": "very_low",
    "post_date": "2026-11-10T16:57:24.000Z",
    "post_kind": "text",
    "post_text": "Hey everyone! I'm new to mass spectrometry and could use some advice on processing some MS/MS data.\n\nI have a compound of interest with a precursor ion at m/z 582.4066. Unfortunately, ESI was not available, so we tried acquiring the MS/MS spectra using laser desorption/ionization (LDI).\n\nthe thing is, the instrument is configured to perform multiple laser shots (62 in total) at \"parts\" of the spot on the stainless-steel target plate, presumably to account for variability in ionization and improve reproducibility.\n\nThe result is that I now have 62 individual MS/MS spectra for the same precursor ion.\n\nMy question is: Is there a way to combine these 62 spectra into a single \"consensus MS/MS spectrum\"?\n\ndata is from a Waters Synapt XS HDMS equipment, and i been visualizing data in MZmine 4.10.6, but cant find a way to combine the spectra. I'm not familiar with MS/MS processing to know what would be the best approach.\n\nThanks!",
    "sentiment": "negative",
    "subreddit": "massspectrometry",
    "event_date": "2026-11",
    "post_title": "Help with combining MS2 spectra",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/massspectrometry/comments/1xss5le/help_with_combining_ms2_spectra/",
    "entity_role": "vendor",
    "post_author": "mikymikes95",
    "upvote_ratio": 1,
    "mention_count": 2,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/massspectrometry/",
    "total_upvotes": 1,
    "comments_total": 6,
    "total_comments": 6,
    "post_author_url": "https://www.reddit.com/user/mikymikes95/",
    "signal_category": "feedback",
    "comments_included": 4,
    "products_mentioned": [
      "Waters Synapt XS HDMS"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.