r/AdditiveManufacturing
How we designed safety into Form Studio 1 and Alpha Resins
- upvotes
- 0
- comments
- 0
Post
Highlighted: the lines this signal was extracted from
TL;DR: Many consumer resins rely on chemistry that shifts the safety burden onto users, through ventilation, respirators, and safety data that often can’t be trusted. With Form Studio 1 and Alpha Resins, we reduced hazards at the source instead: ACMO-free formulations Automatic resin handling and lidded resin tanks that limit spills and skin contact Non-irritant liquid resin under OECD 439 Cured parts that meet ISO 10993 for long-term skin contact The first resin 3D printer setup certified UL GREENGUARD Gold Liquid resin is still a sensitizer, so gloves remain essential. Check out our full overview on safety here. – The issue with the prevalent safety approach Resin printing has largely treated safety as a handling problem: wear a respirator, ventilate the room, read the SDS. Many consumer resins don’t have a findable SDS. When we analyzed dozens of commercial resins, many of their SDSs didn’t match their actual composition. (Link to our report) It also accepts formulation choices that create the hazard in the first place. ACMO (acryloylmorpholine) is widely used because it’s inexpensive and cures quickly - but it also carries respiratory and organ toxicity hazards. The EPA has placed a Significant New Use Rule (SNUR) on it that requires precautions like ventilation or a respirator to minimize exposure. When a resin contains ACMO, managing that hazard becomes the...
Keep reading with a free account
The rest of this post, and every signal for Formlabs, is in your free account.
Also quoted as evidence
Form Studio 1 printing Alpha Resins with the VOC Extractor is the first resin 3D printer setup certified UL GREENGUARD Gold.
From the post