r/SoloSatoshi
The first BM1373 Bitaxe is officially here! The Bitaxe Naja Duo Acheives 4.4 TH/s at 42W with an Efficiency of just 9.5 J/TH.
- upvotes
- 22
- comments
- 8
Post
Highlighted: the lines this signal was extracted from
The new generation of Bitaxe just dropped! the Bitaxe Naja Duo (Model 1201), the first Bitaxe built on Bitmain's 3nm BM1373 S23-class silicon. **Specifications:** * 2× Bitmain BM1373 3nm ASICs. * \~4.4 TH/s @ \~42W stock = 9.5 J/TH, the first Bitaxe to break single-digit J/TH at default settings. * Tested overclock: \~8 TH/s @ 600 MHz / 1,120 mV (\~92W, \~11.5 J/TH). * Thermalright AXP90-X47 low-profile heatsink + 92mm slim PWM fan. * Per-chip temperature monitoring, so throttling and fan curve follow the hotter chip instead of a board average. * 2-phase TI TPS546024A VRM sized for the OC profile. * 1.9″ color LCD (170×320) showing IP, hashrate, temps, and best diff at a glance. * ESP32-S3, esp-miner firmware + AxeOS dashboard, fully open source. * 100% assembled in the USA 🇺🇸. **For context:** it pulls the same 42W as the GT 801 at stock but doubles the hashrate. Two BM1373s basically put you in four-chip BM1370 territory. At $0.12/kWh you're looking at roughly $3.61/month stock or \~$7.95/month fully overclocked. Get notified when the new and improved Bitaxe duo drops and sign up for in-stock notifications below! [https://www.solosatoshi.com/product/bitaxe-naja-duo/](https://www.solosatoshi.com/product/bitaxe-naja-duo/)
