Source: Autobound Signal API · 143 signals tracked for Rockwell Automation · updated
Get Rockwell Automation's live signals in Claude or ChatGPT, or by API
What changed at Rockwell Automation this week? Use Autobound signals for rockwellautomation.com.Post: "Powerflex 755"
Extracted from these lines
[comment u/tcplomp] I hate Rockwell for this. It's quite common to use a him during commissioning, then later remove. To get a proper fault find inside studio you have to stop the PLC.
[image] Unable to merge peripheral differences: The project contains different peripherals than those found in the physical device. We are unable to merge peripheral differences while online with the controller.
“……. Do what the message says ………”
u/Shalomiehomie77017 points · Oct 30, 2026View
“It says it right there... the peripherals dont match and you can't force the match while online. Do what it says. Go offline, upload, save, go online and synchronize.....”
u/Groundbreaking-Ad5968 points · Oct 30, 2026View
“Use CCW to connect to the drive, view the Peripherals there, then compare to the offline file in studio. Check the firmware of the drives and Peripherals also, not just the part numbers.”
u/jhartke6 points · Oct 30, 2026View
“In my experience it's from an option card that is on the physical 755 that isn't present in the project. Match the the on device boards to the project.”
u/toxician3 points · Oct 30, 2026View
“If you remove say a input car or a him it will do this. Have to follow instructions or go online with CCW and see how the drive it set up.”
u/dumpsterfirecontrols1 points · Oct 31, 2026View
What this signalsUser posts often show product pain before it reaches reviews or churn.
Topics
Flair
Products named
reddit-companycustomerFeedbackGet every Reddit signal for Rockwell Automation and the companies you sell to, in the tools you already use.
Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Rockwell Automation this week?”
The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.
Sign up and spend your free credits on the companies you sell to.
This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.
Company
linkedin_urlValue in the APIindustriesValue in the APIemployee_count_lowValue in the APIemployee_count_highValue in the APIrevenueValue in the APIdescriptionValue in the APISignal
signal_nameValue in the APIassociationValue in the APIGET /v1/signals/6b123283-4300-5410-aee5-2d3fd11460a0 returns this record as JSON. POST /v1/companies/enrich returns every signal for rockwellautomation.com.
{
"signal_id": "6b123283-4300-5410-aee5-2d3fd11460a0",
"signal_type": "reddit-company",
"signal_subtype": "customerFeedback",
"detected_at": "2026-10-30T21:04:53+00:00",
"company": {
"name": "Rockwell Automation",
"domain": "rockwellautomation.com"
},
"data": {
"nsfw": false,
"stage": "none",
"awards": 0,
"timing": "ongoing_state",
"topics": [
"plc",
"drives",
"automation",
"usability"
],
"post_id": "1xjrddl",
"summary": "Rockwell Automation faces user frustration in Studio 5000 regarding PowerFlex 755 drive peripheral mismatch handling, which requires stopping the PLC to resolve and fault-find.",
"category": "usability",
"comments": [
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwc7pzghqx0/",
"depth": 0,
"score": 17,
"author": "Shalomiehomie770",
"excerpt": "……. Do what the message says ………",
"posted_at": "2026-10-30T21:10:11.000Z",
"author_url": "https://www.reddit.com/user/Shalomiehomie770/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwc93zokc5c/",
"depth": 0,
"score": 8,
"author": "Groundbreaking-Ad596",
"excerpt": "It says it right there... the peripherals dont match and you can't force the match while online.\n\n Do what it says. Go offline, upload, save, go online and synchronize.....",
"posted_at": "2026-10-30T21:11:03.000Z",
"author_url": "https://www.reddit.com/user/Groundbreaking-Ad596/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwcjvr5vbsw/",
"depth": 0,
"score": 6,
"author": "jhartke",
"excerpt": "Use CCW to connect to the drive, view the Peripherals there, then compare to the offline file in studio. Check the firmware of the drives and Peripherals also, not just the part numbers.",
"posted_at": "2026-10-30T21:17:46.000Z",
"author_url": "https://www.reddit.com/user/jhartke/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwc8dq5i079/",
"depth": 0,
"score": 3,
"author": "toxician",
"excerpt": "In my experience it's from an option card that is on the physical 755 that isn't present in the project. Match the the on device boards to the project.",
"posted_at": "2026-10-30T21:10:36.000Z",
"author_url": "https://www.reddit.com/user/toxician/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwmqvq9ht38/",
"depth": 0,
"score": 1,
"author": "dumpsterfirecontrols",
"excerpt": "If you remove say a input car or a him it will do this. Have to follow instructions or go online with CCW and see how the drive it set up.",
"posted_at": "2026-10-31T01:06:19.000Z",
"author_url": "https://www.reddit.com/user/dumpsterfirecontrols/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rwc95zm52m9/",
"depth": 0,
"score": 1,
"author": "Igor_pole",
"excerpt": "pull up the drive in something like Drive explorer and see what peripherals it has. sometimes there is a comm card that needs to be added to your config in studio for it to work correctly.\n\n https://support.rockwellautomation.com/app/answers/answer_view/a_id/618372/~/driveexplorer-%28freeware%29%3A-weblink-for-download-",
"posted_at": "2026-10-30T21:11:05.000Z",
"author_url": "https://www.reddit.com/user/Igor_pole/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rweje6zqmbo/",
"depth": 0,
"score": 1,
"author": "DiminishedSea",
"excerpt": "Your profile doesn't match the actual drive.\n\n Go offline and sync the drive",
"posted_at": "2026-10-30T22:02:18.000Z",
"author_url": "https://www.reddit.com/user/DiminishedSea/"
},
{
"url": "https://www.reddit.com/r/PLC/comments/1xjrddl/comment/19rx9afwknrep/",
"depth": 0,
"score": 1,
"author": "Accomplished-Law-326",
"excerpt": "You need to record the current drive parameters because it will change it when you upload from the drive.",
"posted_at": "2026-10-31T09:31:45.000Z",
"author_url": "https://www.reddit.com/user/Accomplished-Law-326/"
}
],
"evidence": [
"[comment u/tcplomp] I hate Rockwell for this. It's quite common to use a him during commissioning, then later remove. To get a proper fault find inside studio you have to stop the PLC.",
"[image] Unable to merge peripheral differences: The project contains different peripherals than those found in the physical device. We are unable to merge peripheral differences while online with the controller."
],
"link_url": "https://i.redd.it/2bkgeyaz5oyh1.jpeg",
"virality": "somewhat_high",
"image_url": "https://i.redd.it/2bkgeyaz5oyh1.jpeg",
"post_date": "2026-10-30T21:04:53.000Z",
"post_kind": "image",
"sentiment": "negative",
"subreddit": "PLC",
"event_date": "2026-10",
"post_flair": [
"PLC Question"
],
"post_title": "Powerflex 755",
"prominence": "core",
"source_url": "https://www.reddit.com/r/PLC/comments/1xjrddl/powerflex_755/",
"entity_role": "vendor",
"post_author": "Alarming_Divide6176",
"upvote_ratio": 0.9090909090909091,
"mention_count": 3,
"mention_surge": true,
"subreddit_url": "https://www.reddit.com/r/PLC/",
"total_upvotes": 9,
"comments_total": 23,
"total_comments": 23,
"post_author_url": "https://www.reddit.com/user/Alarming_Divide6176/",
"signal_category": "feedback",
"comments_included": 11,
"products_mentioned": [
"PowerFlex 755",
"Studio 5000"
]
}
}
curl https://signals.autobound.ai/v1/signals/6b123283-4300-5410-aee5-2d3fd11460a0 \
-H "X-API-KEY: $AUTOBOUND_API_KEY"curl -X POST https://signals.autobound.ai/v1/companies/enrich \
-H "X-API-KEY: $AUTOBOUND_API_KEY" \
-H "Content-Type: application/json" \
-d '{"domain":"rockwellautomation.com","limit":20}'Long text fields are shortened on this page.
Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.