Skip to main content
SonyCustomer feedback

A broadcast engineer reports severe network connectivity drops when attempting to control Sony FX3 cameras wirelessly via the Sony App or Anybus system during live productions.

Source: Autobound Signal API · 119 signals tracked for Sony · updated

Get Sony's live signals in Claude or ChatGPT, or by API

AskWhat changed at Sony this week? Use Autobound signals for sony.com.

What happened

Post: "Network/Shading FX3"

Source

RedditOct 28, 2026By u/Little_Post631

r/broadcastengineering

Network/Shading FX3

upvotes
6
comments
16

Post

Highlighted: the lines this signal was extracted from

I have a bit of a weird thing coming up. Concert, 17 Cameras mostly Arri, but also 4 FX3 Wireless.We need to shade the FX3 but we have no Budget for CyanView. So.I've read that Skaarhoj RCPs should be able to control the cameras directly over Network. We do have some, I am not worried about that part so much, I am worried about the Wireless Part. So I had this exact setup before, without Remote Control but the Sony App on a Macbook and the FX3 always disconnected from the network. I had one wireless with the Anybus System, which works pretty good with the Arris we use. But it didn't work consistent at all with the sony. I would certain that I doesn't work at all, but on one day it worked for like 1hour and then never again without changing anything. And the other cam was hard wired and still cut out sometimes. My question would be if some of you guys maybe either know if the skaarhoj thing does indeed work. And how do you get the fx3 to work more consistent. Thanks in advance

reddit.com/r/broadcastengineering/comments/1xhmpna/networkshading_fx3Read the full source

Comments on the post

5 of 16 comments
  • “17 Cameras mostly Arri... but we have no Budget... This kind of stuff always cracks me up.”

    u/Run-And_Gun10 points · Oct 29, 2026View

  • “You need a more robust system than trying to rely on in venue wireless. Even your own wifi system is going to struggle in a concert environment. WaveCentral and a few others make modules for exactly what you’re trying to do that work with Cyanview or Skaarhoj We looked at doing this exact setup wirelessly but client opted to have the camera shade themselves. It’s gone as well as one could expe”

    u/duhweirdy6 points · Oct 28, 2026View

  • “Arri but no budget to color. Copy you.”

    u/RobbLipopp3 points · Oct 29, 2026View

  • “Just do what everyone used to do for camera mixes and handhelds all the time. Color match them as best as possible to your main cameras from the start, then leave gain control for the operators as they find the levels of light in front of them changing. Your biggest issue is negotiating what essentially can become an air gap because of the wireless connections. This may or may not be fixable a”

    u/Needashortername2 points · Oct 30, 2026View

  • “I’d be looking at using WiFi HaLow. I shaded a show in a 3000 pax venue recently, two roaming cams on WiFi (not my choice) and they were predictably in and out the whole time. 2.4/5GHz wifi just isn’t stable enough and the spectrum is too crowded.”

    u/nosuchkarma1 points · Oct 31, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/broadcastengineering
Event date
Oct 2026

Companies

  • ArriAlso named
  • CyanViewAlso named
  • SKAARHOJAlso named
  • AnybusAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Reliability
Virality
Medium
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • broadcasting
  • camera shading
  • wireless networking
  • reliability

Products named

  • FX3

Extraction

Sentiment
Negative
Detected
Oct 28, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Sony and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Sony this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/8c76cf8b-b566-5fc8-afb1-4ec4737b07eb returns this record as JSON. POST /v1/companies/enrich returns every signal for sony.com.

{
  "signal_id": "8c76cf8b-b566-5fc8-afb1-4ec4737b07eb",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-10-28T12:28:53+00:00",
  "company": {
    "name": "Sony",
    "domain": "sony.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "broadcasting",
      "camera shading",
      "wireless networking",
      "reliability"
    ],
    "post_id": "1xhmpna",
    "summary": "A broadcast engineer reports severe network connectivity drops when attempting to control Sony FX3 cameras wirelessly via the Sony App or Anybus system during live productions.",
    "category": "reliability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/comment/19rt3m90rwgw5/",
        "depth": 0,
        "score": 10,
        "author": "Run-And_Gun",
        "excerpt": "17 Cameras mostly Arri...\n\nbut we have no Budget...\n\n This kind of stuff always cracks me up.",
        "posted_at": "2026-10-29T01:36:05.000Z",
        "author_url": "https://www.reddit.com/user/Run-And_Gun/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/comment/19rs5eeyr8ghw/",
        "depth": 0,
        "score": 6,
        "author": "duhweirdy",
        "excerpt": "You need a more robust system than trying to rely on in venue wireless. Even your own wifi system is going to struggle in a concert environment.\n\n WaveCentral and a few others make modules for exactly what you’re trying to do that work with Cyanview or Skaarhoj\n\n We looked at doing this exact setup wirelessly but client opted to have the camera shade themselves. It’s gone as well as one could expe",
        "posted_at": "2026-10-28T12:48:55.000Z",
        "author_url": "https://www.reddit.com/user/duhweirdy/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/comment/19rszv0afg8zn/",
        "depth": 0,
        "score": 3,
        "author": "RobbLipopp",
        "excerpt": "Arri but no budget to color. Copy you.",
        "posted_at": "2026-10-29T00:11:51.000Z",
        "author_url": "https://www.reddit.com/user/RobbLipopp/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/comment/19rvpf6e2umpv/",
        "depth": 0,
        "score": 2,
        "author": "Needashortername",
        "excerpt": "Just do what everyone used to do for camera mixes and handhelds all the time.\n\n Color match them as best as possible to your main cameras from the start, then leave gain control for the operators as they find the levels of light in front of them changing.\n\n Your biggest issue is negotiating what essentially can become an air gap because of the wireless connections. This may or may not be fixable a",
        "posted_at": "2026-10-30T12:39:10.000Z",
        "author_url": "https://www.reddit.com/user/Needashortername/"
      },
      {
        "url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/comment/19rx147kwqdts/",
        "depth": 0,
        "score": 1,
        "author": "nosuchkarma",
        "excerpt": "I’d be looking at using WiFi HaLow. I shaded a show in a 3000 pax venue recently, two roaming cams on WiFi (not my choice) and they were predictably in and out the whole time. 2.4/5GHz wifi just isn’t stable enough and the spectrum is too crowded.",
        "posted_at": "2026-10-31T06:28:30.000Z",
        "author_url": "https://www.reddit.com/user/nosuchkarma/"
      }
    ],
    "evidence": [
      "[post] without Remote Control but the Sony App on a Macbook and the FX3 always disconnected from the network.",
      "[post] I had one wireless with the Anybus System, which works pretty good with the Arris we use. But it didn't work consistent at all with the sony.",
      "[post] And the other cam was hard wired and still cut out sometimes."
    ],
    "virality": "medium",
    "post_date": "2026-10-28T12:28:53.000Z",
    "post_kind": "text",
    "post_text": "I have a bit of a weird thing coming up. Concert, 17 Cameras mostly Arri, but also 4 FX3 Wireless.We need to shade the FX3 but we have no Budget for CyanView. So.I've read that Skaarhoj RCPs should be able to control the cameras directly over Network. We do have some, I am not worried about that part so much, I am worried about the Wireless Part.\n\nSo I had this exact setup before, without Remote Control but the Sony App on a Macbook and the FX3 always disconnected from the network. I had one wireless with the Anybus System, which works pretty good with the Arris we use. But it didn't work consistent at all with the sony. I would certain that I doesn't work at all, but on one day it worked for like 1hour and then never again without changing anything. And the other cam was hard wired and still cut out sometimes.\n\nMy question would be if some of you guys maybe either know if the skaarhoj thing does indeed work. And how do you get the fx3 to work more consistent.\n\nThanks in advance",
    "sentiment": "negative",
    "subreddit": "broadcastengineering",
    "event_date": "2026-10",
    "post_title": "Network/Shading FX3",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/broadcastengineering/comments/1xhmpna/networkshading_fx3/",
    "entity_role": "vendor",
    "post_author": "Little_Post631",
    "upvote_ratio": 1,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/broadcastengineering/",
    "total_upvotes": 6,
    "comments_total": 16,
    "total_comments": 16,
    "event_date_text": "before",
    "other_companies": [
      {
        "name": "Arri",
        "role": "alternative",
        "domain": "arri.com"
      },
      {
        "name": "CyanView",
        "role": "alternative",
        "domain": "cyanview.com"
      },
      {
        "name": "SKAARHOJ",
        "role": "alternative",
        "domain": "skaarhoj.com"
      },
      {
        "name": "Anybus",
        "role": "partner",
        "domain": "hms-networks.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Little_Post631/",
    "signal_category": "feedback",
    "comments_included": 5,
    "products_mentioned": [
      "FX3"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.