Skip to main content
TraneCustomer feedback

Building automation technicians report recurring frustration with Trane BACnet integrations, noting that Trane startup technicians routinely fail to put required scheduling points into service.

Source: Autobound Signal API · 58 signals tracked for Trane · updated

Get Trane's live signals in Claude or ChatGPT, or by API

AskWhat changed at Trane this week? Use Autobound signals for trane.com.

What happened

Post: "Gut check for Trane Integration with Niagara"

Source

RedditOct 16, 2026By u/Interesting_Ideal480

r/BuildingAutomation

Gut check for Trane Integration with Niagara

upvotes
19
comments
16

Extracted from these lines

  • [comment u/amsgh] When trane sets these up they are supposed to enable the features that apply to the unit like occupancy schedule heat, heat mode, etc. they usually never do so you have to put the points in service via integration.

  • [comment u/amsgh] If trane did their job during startup their tool (used to be rover/tracer not sure if still) would put the correct points into service. Why I hate this part of the job because we have

reddit.com/r/BuildingAutomation/comments/1x7vgk6/gut_check_for_trane_...Open the source

Comments on the post

5 of 16 comments
  • “Most Intellipak and BCI card integrations you need to set BAS Control or Remote might be the point name for the boolean. That should allow it to take control over BACnet versus a local option.”

    u/HVACcontrolsGuru15 points · Oct 16, 2026View

  • “Search for the Trane BCI-R integration guide, it’ll explain exactly how to control the unit over bacnet”

    u/maximusdm772 points · Oct 16, 2026View

  • “I’ve had a site with a lot of trane units where the balancers left the unit in manual off instead of auto. So none of the units were following the schedule.”

    u/Octogeon2 points · Oct 17, 2026View

  • “Yes, Occupancy Request is the TOD Schedule point.”

    u/basscreator222 points · Oct 17, 2026View

  • “When trane sets these up they are supposed to enable the features that apply to the unit like occupancy schedule heat, heat mode, etc. they usually never do so you have to put the points in service via integration. If trane did their job during startup their tool (used to be rover/tracer not sure if still) would put the correct points into service. Why I hate this part of the job because we have”

    u/amsgh2 points · Oct 17, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/BuildingAutomation

Companies

  • Niagara FrameworkAlso named

The full record

From the Signal API record

Numbers

Mentions
3

Details

Timing
Ongoing state
Category
Integration
Link URL
i.redd.it
Virality
Somewhat high
Post kind
Image
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • integration
  • building automation
  • hvac
  • bacnet

Products named

  • BCI
  • BCI-R
  • Intellipak
  • Rover
  • Tracer

Extraction

Sentiment
Negative
Detected
Oct 16, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Trane and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Trane this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/2e9fb525-cf36-5934-a3dd-1d48500c7307 returns this record as JSON. POST /v1/companies/enrich returns every signal for trane.com.

{
  "signal_id": "2e9fb525-cf36-5934-a3dd-1d48500c7307",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-10-16T23:36:38+00:00",
  "company": {
    "name": "Trane",
    "domain": "trane.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "hvac",
      "bacnet",
      "integration",
      "building automation"
    ],
    "post_id": "1x7vgk6",
    "summary": "Building automation technicians report recurring frustration with Trane BACnet integrations, noting that Trane startup technicians routinely fail to put required scheduling points into service.",
    "category": "integration",
    "comments": [
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7ldig/",
        "depth": 0,
        "score": 15,
        "author": "HVACcontrolsGuru",
        "excerpt": "Most Intellipak and BCI card integrations you need to set BAS Control or Remote might be the point name for the boolean. That should allow it to take control over BACnet versus a local option.",
        "posted_at": "2026-10-16T23:44:07.000Z",
        "author_url": "https://www.reddit.com/user/HVACcontrolsGuru/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7mey0/",
        "depth": 0,
        "score": 2,
        "author": "maximusdm77",
        "excerpt": "Search for the Trane BCI-R integration guide, it’ll explain exactly how to control the unit over bacnet",
        "posted_at": "2026-10-16T23:49:57.000Z",
        "author_url": "https://www.reddit.com/user/maximusdm77/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7oys5/",
        "depth": 0,
        "score": 2,
        "author": "Octogeon",
        "excerpt": "I’ve had a site with a lot of trane units where the balancers left the unit in manual off instead of auto. So none of the units were following the schedule.",
        "posted_at": "2026-10-17T00:04:24.000Z",
        "author_url": "https://www.reddit.com/user/Octogeon/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7qrog/",
        "depth": 0,
        "score": 2,
        "author": "basscreator22",
        "excerpt": "Yes, Occupancy Request is the TOD Schedule point.",
        "posted_at": "2026-10-17T00:14:30.000Z",
        "author_url": "https://www.reddit.com/user/basscreator22/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/phdlxzq/",
        "depth": 0,
        "score": 2,
        "author": "amsgh",
        "excerpt": "When trane sets these up they are supposed to enable the features that apply to the unit like occupancy schedule heat, heat mode, etc. they usually never do so you have to put the points in service via integration. If trane did their job during startup their tool (used to be rover/tracer not sure if still) would put the correct points into service.\n\n Why I hate this part of the job because we have",
        "posted_at": "2026-10-17T21:07:08.000Z",
        "author_url": "https://www.reddit.com/user/amsgh/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7v5my/",
        "depth": 0,
        "score": 1,
        "author": "Psych0matt",
        "excerpt": "Sounds to me like an internal setting on the unit itself, likely a schedule that’s gone unoccupied",
        "posted_at": "2026-10-17T00:39:23.000Z",
        "author_url": "https://www.reddit.com/user/Psych0matt/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7x9ab/",
        "depth": 0,
        "score": 1,
        "author": "Its_ok_to_not_be_oka",
        "excerpt": "Make sure your heartbeat is good and not over 15m. Any write over 15m and the point bounces and will fail reliability",
        "posted_at": "2026-10-17T00:51:29.000Z",
        "author_url": "https://www.reddit.com/user/Its_ok_to_not_be_oka/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/comment/ph7mdk9/",
        "depth": 0,
        "score": 1,
        "author": "MNtallguy32",
        "excerpt": "I’ve had to go in each point hit composite, go into proxy point and expose write value. The. Add a not equal block. Link the schedule to in A (also link schedule to In 10 of occ cmd), link In B from the out of the occ cmd, Link out of the not equal to In 9. Then go into the not equal and make sure it’s null on inactive. I’ve found this works most of the time.",
        "posted_at": "2026-10-16T23:49:44.000Z",
        "author_url": "https://www.reddit.com/user/MNtallguy32/"
      }
    ],
    "evidence": [
      "[comment u/amsgh] When trane sets these up they are supposed to enable the features that apply to the unit like occupancy schedule heat, heat mode, etc. they usually never do so you have to put the points in service via integration.",
      "[comment u/amsgh] If trane did their job during startup their tool (used to be rover/tracer not sure if still) would put the correct points into service. \n\n Why I hate this part of the job because we have"
    ],
    "link_url": "https://i.redd.it/exouohta0xvh1.jpeg",
    "virality": "somewhat_high",
    "image_url": "https://i.redd.it/exouohta0xvh1.jpeg",
    "post_date": "2026-10-16T23:36:38.000Z",
    "post_kind": "image",
    "sentiment": "negative",
    "subreddit": "BuildingAutomation",
    "post_title": "Gut check for Trane Integration with Niagara",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/BuildingAutomation/comments/1x7vgk6/gut_check_for_trane_integration_with_niagara/",
    "entity_role": "vendor",
    "post_author": "Interesting_Ideal480",
    "upvote_ratio": 1,
    "mention_count": 3,
    "mention_surge": true,
    "subreddit_url": "https://www.reddit.com/r/BuildingAutomation/",
    "total_upvotes": 19,
    "comments_total": 16,
    "total_comments": 16,
    "other_companies": [
      {
        "name": "Niagara Framework",
        "role": "partner",
        "domain": "tridium.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Interesting_Ideal480/",
    "signal_category": "feedback",
    "comments_included": 8,
    "products_mentioned": [
      "BCI",
      "BCI-R",
      "Intellipak",
      "Rover",
      "Tracer"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.